The IP related settings are also required if you are going to run Dirac Live room calibration software.įor more information about the features of your X series processor or XR series receiver please refer to the individual product manuals available here, MANUALS. There is also an Automation Table (Excel) with raw Serial, IR to HEX, and RC-5 IR codes. Key Features Operating Voltage Range: 3.3V to 5.5V Maximum Current (mA): 35mA RS232 Output Swing at 3.3V operating voltage: 6V RS232 Output Swing at 3. Savant SSC-W008-00 Home Automation Wireless Smart Controller Module. This prevents the unit from going into standby mode automatically.ĭrivers and modules for the various control platforms are available in the Downloads section of the X7 / X9 and XR 8 / 6 / 4 product pages on the AudioControl website. The MAX3232 Module has a MAX3232 IC, that facilitates serial communication between a computer and a microcontroller. NEW SAVANT SSC-0012-00 Smart Controller 12 6 IR 2 RS232 2 GPIO 2 RELAY. In the Engineering menu scroll down to the Standby Mode setting and select Manual. In the HDMI Settings menu scroll down to the HDMI Bypass & IP setting and select HDMI & IP On. In Blueprint it is easy to setup this connection between the controllers. The way we connected the two is using the RS-232 Integration ports on the SSP to connect to the SSL. They are both mounted in an equipment rack. company has teamed up with Savant to provide dealers with a set of TCP/IP and two-way RS-232 driver modules for Panamax/Furman BlueBOLT(R)-compatible.

In the General Settings menu scroll down to the Control setting and select either IP or RS232. We are using a SmartLighting 18 (SSL-P018) as the Savant lighting controller. Please refer to this setup menu article on how to access and navigate the setup menus using the front panel buttons or via the web interface, SETUP MENUS. and write a separate module for each HVAC brand. the communication to a complex HVAC system, and it allows to control it locally via a home automation system (Crestron, Savant, etc.). For control via IP or RS232 please adjust the following settings in the setup menus. Interfaces via RS232 RS485, Ethernet, KNX, or physical layers for all Home.

communicate to lighting modules in the Module Enclosures. Control can either be via IP, RS232, or IR. The Savant SmartLighting 2 controller with Wi-Fi (SSL-W002) Quick Reference. Your AudioControl processor or receiver is able to be controlled with home automation systems such as Control4, Crestron, Savant, RTI, etc.

Module savant rs232